الدفع نوع: | L/C,T/T,Paypal,Western Union |
---|---|
Incoterm: | FOB,CFR,CIF |
موعد التسليم: | 7 أيام |
نموذج: TDS-100W
Liquid Types: Most Clean Liquids Or Liquids Containing Small Amounts Of Suspended Solids Or Gas Bubbles
Accuracy: 1.5%
Measuring Principle: Transit-Time
Pipe Size: DN15...DN6000
Max. Fluid Temperature: -40...+160℃
Output: 4-20mA/Pulse/RS485
Language: English; Chinese(Other's On Request)
Display: LCD With Backlight, Display Accumulated Flow/heat, Instantaneous Flow/heat, Velocity, Time Etc.
Measurement Period: 500ms
Power Supply: AC220V Or DC24V
تفاصيل التعبئة والتغليف: كرتون أو حالة خشبية
إنتاجية: 10000
علامة تجارية: PioneerInstrument
نقل: Ocean,Land,Air, UPS
مكان المنشأ: الصين
تفاصيل التجارة القدرة علي التوريد: 1000
الشهادات: CE
رمز النظام المنسق: 9026100000
ميناء: Dalian,Dalian,Dalian
أنا منتدى مرسى الأحاسيس
تم تصميم مقياس التدفق بالموجات فوق الصوتية TDS-100W لقياس سرعة السائل من السائل داخل قناة مغلقة. محولات الطاقة هي نوع من عدم الاتصال ، المشبك ، والذي سوف يوفر فوائد التشغيل غير الخالي والتركيب السهل.
يستخدم مقياس الجريان في وقت العبور TDS-100W محولي طاقة يعملان كجهاز إرسال وجهاز استقبال فوق صوتي. يتم تثبيت المحولات على السطح الخارجي للأنبوب المغلق على مسافة محددة من بعضها البعض. يمكن تركيب المحولات في طريقة V حيث يقوم الصوت بعكس الأنبوب مرتين ، أو بطريقة W حيث يقوم الصوت بعكس الأنبوب أربع مرات ، أو في طريقة Z حيث يتم تثبيت المحولات على جوانب متقابلة من الأنبوب ويتقاطع الصوت الأنابيب مرة واحدة. يعتمد هذا التحديد لطريقة التثبيت على خصائص الأنابيب والسائل. يعمل مقياس التدفق من خلال إرسال واستقبال رشقة معدلة بتردد من الطاقة الصوتية بين المحولتين وقياس وقت العبور الذي يستغرقه الصوت للتنقل بين المحولتين. الفرق في وقت العبور المقاس يرتبط مباشرة وبشكل محدد بسرعة السائل في الأنبوب ، كما يلي:
![]() |
![]() |
مواصفات
Items |
Specifications |
|
Main unit |
Accuracy |
Better than ±1% |
Repeatability |
Better than 0.2% |
|
Principle |
Transit-time measuring principle |
|
Measurement Period |
500ms |
|
Display |
LCD with backlight, display accumulated flow/heat, instantaneous flow/heat, velocity, time etc. |
|
Output |
Analogue output: 4-20mA or 0-20mA current output. Impedance 0∼1kW. Accuracy 0.1%. |
|
OCT output: Frequency signal (1~9999HZ) |
||
Relay output: over 20 source signal (no signal, reverse flow etc.) |
||
RS485 serial port |
||
|
||
|
Input |
Three analogue input |
Three-wire PT100 resistor input (optional) |
||
Other functions |
Automatically record the totaliser data of the last 64 days / 64 months / 5 years; The power-on time and corresponding flow rate of the last 64 power on and off events. Allow manual or automatic flow loss compensation The instrument working status of the last 64 days |
|
material |
Steel, stainless steel, cast iron, cement pipe, copper, PVC, aluminum, FRP etc. Liner is allowed |
|
Size |
15-6000mm |
|
Straight pipe section |
In the upstream it must be beyond 10D, in the downstream it must be beyond 5D, in the upstream the length must be beyond 30D from the access of the pump. (D stands for pipe diameter) |
|
Liquid |
Types |
Water, sea water, industrial sewage, acid & alkali liquid, alcohol, beer, all kinds of oils which can transmit ultrasonic single uniform liquid |
Temperature |
Standard: -30˚C - 90˚C ,High-temperature:-30˚C - 160˚C |
|
Turbidity |
Less than 10000ppm, with a little bubble |
|
Flow Direction |
Bi-directional measuring, net flow/heat measuring |
|
Environment |
Temperature |
Main Unit: -30˚C - 80˚C |
Transducer: -40℃ -110℃, Temperature transducer: select on enquiry |
||
Humidity |
Main Unit: 85% RH |
|
Transducer: water-immersible, water depth less than 3m |
||
Cable |
Twisted Pair Line, standard length of 20m, can be extended to 500m (not recommended); Contact the manufacturer for longer cable requirement. RS-485 interface, transmission distance up to 1000m |
|
Power Supply |
AC220V or DC24V |
|
Power Consumption |
Less than 1.5W |
|
Protocols |
MODBUS, M-BUS, Fuji extended protocol and other factory protocol |
اشترك في النشرة الإلكترونية:
الحصول على التحديثات، خصومات وعروض خاصة وجوائز كبيرة!